We supply all the accessories you need in order to propose the best possible storage solution, and to protect your racks and material handling infrastructure.
The footplate and levelling plate
A range of dedicated footplates have been designed for specific applications: VNA-applications, High-Bay systems, etc... The load bearing capacity depends on the effective area of the footplate as well as the type of concrete slab.
The racking is adjusted by means of levelling plates, in accordance with the applied regulations. After levelling, the racking is anchored in the concrete slab.
The pick & deposit station
The Pick & Deposit Station is installed at the end of the racking aisles. It serves as an interface between the pallet handling equipment (such as VNA-trucks) and the trucks used for in- or outbound. The Station can be equipped with a centering device for a more accurate positioning of the pallets.
The braced racking
Adding bracing in the down-aisle direction of the racking will increase the load capacity of the frames. For AS/RS-systems the bracing is needed to meet and secure the assembly tolerances.
The vertical bracing (called the spine bracing) is located at the back of the rack. It works in the xy-plane. The horizontal bracing (called the plan bracing) is located in between two beams giving stability in the xz-plane.
Very narrow aisle racking — ground guidance
This type of racking is operated with "very narrow aisle" trucks. They are guided through the aisle, allowing faster and easier operation. Inductive guidance often replaces the rail guidance. The design of the ground guidance depends very much on the type of lift-truck. The low guidance profiles allow placing pallets on the floor, the high guidance profiles require extra bottom beams.